Filter
Top Products
MultiVOIP User Guide Quick Start Instructions
33
Quick Hookups
Hookup for MVP2410 & MVP3010
Digital Voice
Trunk
O
l
10 /100
RS-232
Ethernet
Command
Cabling to your IP network.
RJ-45 connector.
T1/E1/PRI cabling to your PBX,
and/or to the PSTN.
RJ-45 connector.
On/Off Switch
Power Cable
Receptacle
Cabling to computer running
MultiVOIP software.
RJ-45 to serial connector (DB9).
Grounding
Screw
T1/E1 MultiVOIP Hookup
(MVP-2410/3010)
Hookup for MVP410 & MVP810
E&M
FXS/FXO
E&M
FXS/FXO
E&M
FXS/FXO
E&M
FXS/FXO
E&M
FXS/FXO
E&M
FXS/FXO
E&M
FXS/FXO
E&M
FXS/FXO
Grounding
Screw:
Connect to
Earth Ground
On/Off
Switch
Power Cable
Receptacle
Cabling to your IP network.
RJ-45 connector.
Cabling to computer running
MultiVOIP software.
Connector at MultiVOIP: DB-25.
Connector at computer: DB-9.
Cabling to phone equipment.
MVP810 has 8 connector pairs.
MVP410 has 4 connector pairs.
Only 1 connector of any pair is
used at a time.
Analog MultiVOIP Hookup
MVP-410/810
E&M (RJ-45 connector):
connects to E&M trunk line
from PBX or telco office.
FXS
(RJ-11 connector):
connects to phone, fax,
or key phone system.
FXO (RJ-11 connector):
connects to analog phone line
or analog PBX extension.
Ethernet
Command