Muratec MFX-1200 All in One Printer User Manual


 
Trademarks
Muratec, the Muratec logo and all Muratec fax product names contained herein are
trademarks of Muratec America, Inc.
E
NERGY
S
TAR
is a registered mark of the United States Environmental Protection
Agency.
Copyright
Copyright ' 2000 by Muratec America, Inc, All rights reserved.
As an Energy Star
partner, Muratec America, Inc., has deter-
mined that this product meets the Energy Star guidelines for
energy efficiency.
Energy saving
Your machine can save the energy with its Energy Saving Mode.
In the Energy Saving Mode the printer will not use its fusing lamp and Energy Save
Mode will be displayed on the
LCD
. If your machine receives a fax message or if any
key is pressed your machine will automatically wake up.
The time for the machine to enter the Energy saving mode can be selected from 1 to
120 minutes. For details, see Setting sleep mode, page 4.10.
Super G3 is an extension of Group 3 fax technology standards,
allowing the use of high-speed
ITU
-
TV
.34 bis modems for 33.6
Kbps transmission and high-speed protocols for rapid handshak-
ing.
JBIG
Joint Bi-level Image experts Group, the new
ITU
-
T
stan-
dard image data compression method. As
JBIG
compresses the
data more efficiently than
MMR
, it is especially effective when
transmitting halftone (grayscale) image document.
Note: Super G3 and JBIG are available only for MFX-1600.
This manual and any updates to it can be found online at www.muratec.com
Go to the Products section of this site, then click on MFX-1200/1600