Filter
Top Products
Common settings
Turning the department code setting on and off
1
Press
MENU
, [Mach Set],
N
.
2
Press [Setting].
Note: If department code operation is pro-
tected (see below), the fax beeps briefly
and then returns to standby mode. You
will have to turn off the protection first, then repeat this step.
3
Select desired setting.
4
Press [Enter].
Turning department code protection on and off
Important: This feature will work only if you’ve activated the passcode protection
(see page 3.61).
1
Press
MENU
, [Mach Set],
N
,
NEXT
.
2
Press [Protect].
3
Use the numeric keypad to enter the four-digit
passcode.
4
Press [Enter].
5
Select desired setting.
6
Press [Enter] to save the setting.
Select the department mode
You can select the mode, department code (four-digit number) or department ID (ten
characters or numbers), which you will enter before sending a fax or making a copy.
1
Press
MENU
, [Mach Set],
N
,
NEXT
,
NEXT
.
2
Press [Mode].
3
Select desired setting.
4
Press [Enter] to save the setting.
4.13
Common Settings Getting Started