Muratec MFX-2590 All in One Printer User Manual


 
1-34 Outputting Lists
Printing the User Usage Management List
Prints a list of the number of pages each user has used for each mode, and total results
for the charges and communication times.
The following information is included on the user usage management list.
The charge per page for copies, faxes, scans, and prints.
The total charge and total communication time for all users
The total communication time for guests and regular users
The total number of pages and total charge of faxing for guests and regular users
Note
The number of pages and communication times for internet faxes are added to the
fax items.
Only the items set to ON in User Usage Management are printed in the list. (See
page 2-35.)
A maximum of 999,999 pages and a maximum time of 999:59:59 (999 hours, 59
minutes, 59 seconds) can be counted.
For information on resetting the counters, refer to “ Erasing the Accounting Data”.
(See page 2-39.)
If you want to print the device usage status for a specific user only, print the list
from OfficeBridge. For details, refer to Chapter 3, “Usage Management” in the
OfficeBridge Guide.
Press <Setting>.
1
Press the [List] tab
2
.
Press [User / Cost].
3
Select [ON] to enable duplex printing, or [OFF] to disable it.
4
Select [ON] to enable combined printing, or [OFF] to disable it.
5
Press [Yes].
6