Filter
Top Products
2-4 Setting Security Codes
Setting Security Codes
You can set an administrator password to prevent users other than the administrator
from editing the settings in the [Management] screen, and enable the administrator to
centrally manage machines. A protect passcode is a four digit number required when
setting function protect settings and printing security reception documents.
Setting the Administrator Password
Up to 28 characters can be entered for an administrator password. Make sure to make a
note of and store the password after setting it.
IMPORTANT
If you forget the administrator password, it is necessary to initialize the machine and
set the password again.
In such a case, contact your authorized Muratec dealer.
Setting the Administrator Password
Press <Setting>.
1
Press
2
the [Management] tab.
Press [
3
Administrator Password].