Filter
Top Products
Closed Communication 2-11
1
2
Management
Select [ON] and press [Enter].
7
Press [OFF] to disable closed reception.
Setting Passcode Polling
If you set passcode polling, you can only perform polling with Muratec machines that also
have the same passcode set. If the passcode does not match, polling cannot be performed.
Note
To set the passcode, refer to “Setting the Passcode”. (See page 2-12.)
Press <Setting>.
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Security Communication].
5