Filter
Top Products
Changing the default settings
Changing the dialing pause length
Default setting: 2 seconds.
The pause is set by the factory to last two seconds, but you can set it to last as long
as ten seconds if necessary. To change the pause length:
1
Press Program key,
B
,2,0,5,
ENTER
.
2
Use the numeric keypad to enter the length you want for the dialing pause.
Here, we ve chosen nine seconds.
Note: The length setting requires two digits. Always enter a leading zero for
lengths less than 10 seconds.
3
Press
ENTER
to save the setting.
Changing redial settings
Default setting: Number of redial: 2 times, Redial interval: 1 minute.
It s up to you how many times the fax redials a number and how long it waits
between redials (that length of time between calls is the redial interval).
To program the redial settings:
1
Press Program key,
B
,2,0,4,
ENTER
.
2
Use the numeric keypad to enter the number of redials you want. Choose
from 2 to 15 redials. In this example, we ve entered 03.
Note: Enter a leading zero when entering a quantity less than 10.
3
Press
ENTER
to save the setting.
4
The
LCD
now shows:
5
Use the numeric keypad to enter the length you want between redial
attempts. Choose from 1 to 5 minutes. In this example, we ve chosen 4.
6
Press
ENTER
to save the setting.
Redial Interval
Interval (1-5): 4
Redial Interval
Interval (1-5): 1
# Of Redials
# (02-15): 0
3
# Of Redials
# (02-15): 0 2
Dialing Pause
T ime (02-10): 0 9
Dialing Pause
T ime (02-10): 0
2
4.5
Settings for dialing