Filter
Top Products
Index
PCI-6023E/6024E/6025E User Manual I-2
©
National Instruments Corporation
AOGND signal
description (table), 4-4
signal summary (table), 4-7
B
bipolar input, 3-2
block diagram, 3-1
bulletin board support, D-1
C
cables. See also I/O connectors.
custom cabling, B-1 to B-2
field wiring considerations, 4-49 to 4-50
optional equipment, 1-6
calibration, 5-1 to 5-3
adjusting gain error, 5-3
external calibration, 5-2 to 5-3
loading calibration constants, 5-1 to 5-2
self-calibration, 5-2
specifications, A-9
charge injection, 3-5
clocks, board and RTSI, 3-8
common-mode signal rejection
considerations, 4-19
commonly asked questions. See questions and
answers.
ComponentWorks software, 1-3
configuration
common questions, C-2
hardware configuration, 2-1 to 2-2
connectors. See I/O connectors.
CONVERT* signal
DAQ timing connections, 4-38 to 4-39
signal routing (figure), 3-7
custom cabling, B-1 to B-2
customer communication, xiv, D-1 to D-2
D
DAC0OUT signal
analog output signal connections, 4-20
description (table), 4-4
signal summary (table), 4-7
DAC1OUT signal
analog output signal connections, 4-20
description (table), 4-4
signal summary (table), 4-7
DAQ-STC, C-1
DAQ timing connections, 4-32 to 4-40
AIGATE signal, 4-39
CONVERT* signal, 4-38 to 4-39
EXTSTROBE* signal, 4-33 to 4-34
SCANCLK signal, 4-33
SISOURCE signal, 4-40
STARTSCAN signal, 4-36 to 4-38
TRIG1 signal, 4-34 to 4-35
TRIG2 signal, 4-35 to 4-36
typical posttriggered acquisition
(figure), 4-32
typical pretriggered acquisition
(figure), 4-33
DATA signal
description (table), 4-26
mode 1 input timing (figure), 4-27
mode 1 output timing (figure), 4-28
mode 2 bidirectional timing (figure), 4-29
DGND signal
description (table), 4-4
signal summary (table), 4-7
DIFF mode
description (table), 3-2
recommended configuration (figure),
4-12
differential connections, 4-13 to 4-16
ground-referenced signal sources, 4-14
nonreferenced or floating signal
sources, 4-15 to 4-16
when to use, 4-13
PCI.book Page 2 Wednesday, September 16, 1998 9:09 AM