Filter
Top Products
© National Instruments Corporation 3 Getting Started with R Series Intelligent DAQ
Figure 2. Installing an NI PCI-78xxR Device
Figure 3. Installing an NI PXI-78xxR Device in a PXI Chassis
5. For the NI PCI-78xxR, secure the device mounting bracket to the computer back panel rail. For the
NI PXI-78xxR, secure the device front panel to the chassis front panel mounting rail using the
front-panel mounting screws.
6. For the NI PCI-78xxR, replace the computer cover, if applicable.
7. Plug in and power on the computer or PXI chassis.
To confirm that your device is recognized, complete the following additional steps:
1. Double-click the Measurement & Automation icon on the desktop to open Measurement &
Automation Explorer (MAX).
2. Expand Devices and Interfaces.
3. Verify that the device appears under Devices and Interfaces»RIO Devices.
1NI PCI-78xxR Device 3 PCI System Slot 3 PC with PCI Slot
1 PXI Chassis
2 PXI System Controller
3 NI PXI-78xxR Device
4 Injector/Ejector Handle
5 Front-Panel Mounting Screws
6 Module Guides
7 Power Switch
3
1
2
3
2
4
PXI-1000B
7
5
6
1