National Instruments VXI-USB Network Card User Manual


 
Glossary
© National Instruments Corporation G-3 VXI-USB User Manual
byte order How bytes are arranged within a word or how words are arranged within
a longword. Motorola ordering stores the most significant byte (MSB) or
word first, followed by the least significant byte (LSB) or word. Intel
ordering stores the LSB or word first, followed by the MSB or word.
C
CCelsius
CLK10 A 10 MHz, ±100 ppm, individually buffered (to each module slot),
differential ECL system clock that is sourced from Slot 0 of a VXIbus
mainframe and distributed to Slots 1 through 12 on P2. It is distributed to
each slot as a single-source, single-destination signal with a matched delay
of under 8 ns.
Commander A message-based device that is also a bus master and can control one or
more Servants.
configuration registers A set of registers through which the system can identify a module
device type, model, manufacturer, address space, and memory
requirements. To support automatic system and memory configuration,
the VXI specification requires that all VXIbus devices have a set of such
registers.
D
Data Transfer Bus DTB; one of four buses on the VMEbus backplane. The DTB is used by a
bus master to transfer binary data between itself and a slave device.
DMA Direct Memory Access—a method by which data is transferred between
devices and internal memory without intervention of the central processing
unit. DMA is the fastest method of transferring data to/from computer
memory.
DRAM Dynamic RAM (Random Access Memory)—storage that the computer
must refresh at frequent intervals.
dynamic
configuration
A method of automatically assigning logical addresses to VXIbus devices
at system startup or other configuration times.