Filter
Top Products
Windows Setup 4-25
N
EC Express5800/ft series clear installation
** Please do not perform any operations. **
** The system will restart automatically. **
Configuring System.
The system will automatically restart in approximately 2 minutes.
*** Setting [ft series environment] ***
*** Setting [ft series environment (NECHWID)] ***
*** Checking [disk space] ***
The system will automatically restart in approximately 10 seconds.
31. After the the system is automatically rebooted, the file system will be changed from
FAT32 to NTFS and the file system will be converted automatically. There is no user
intervention.
32. After the system is restarted, the setup screen will be displayed and the setup will proceed
automatically. There is no user intervention.
The following settings are made automatically:
[Collecting information] - [Dynamic Update] - [Preparing installation] - [Installing Windows]
- [Finalizing installation]
IMPORTANT: When restarting, the message “Press any key to boot from CD...” will
appear, but user intervention is not required.
33. The system will be automatically rebooted. No user intervention is required.
IMPORTANT:
When rebooting, the message “Press any key to boot from CD...” will appear, but
user intervention is not required.
The selection of “Previous Operating System C:” may be displayed on the OS
selection screen. Do not select it. Selecting “Previous Operating System C:” will
display black screen and the process will be stopped. In such case, reboot the
system by pressing Ctrl + Alt + Delete or switching the power to OFF/ ON.
34. After the system is rebooted, the following message will appear and the installation will be
continued. The system configuration is done automatically. User intervention is not required.
IMPORTANT: Never terminate the above program while it is running. If it is
terminated by closing the window, etc., the installation will be stopped. In such case,
operations on Windows will be possible, but each module or PCI board will not be
duplicated properly. If this happens, you need to start over ft series setup.