Filter
Top Products
4-24
Console Redirection
Select "Console Redirection" on the System Hardware menu and press Enter to display the
following screen.
Serial Port Address:
Baud Rate:
Flow Control:
Console Connection:
If enabled, the console
will be redirected to
this port.
Item Specific HelpConsole Redirection
[Disabled]
[19.2K]
[XON/XOFF]
[Direct]
System Hardware
Phoenix BIOS Setup Utility
F1 Help
-/+ Change Values
F9 Setup Defaults
F10 Save Changes & ExitSub-MenuEnter Select
Esc Exit
Select Item
Select Menu
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Serial Port
Address
[Disabled]
On-board COM B
Select a serial port to connect the HW
console.
Selecting "On-board COM B" changes
"Boot-time Diagnostic Screen" to
"Enabled".
Baud Rate [19.2K]
57.6K
Select a baud rate for communications
with the connected HW console.
Flow Control [None]
XON/XOFF
Select a flow control method.
Console
Connection
[Direct]
Via modem
Select a connection with the HW console.
[ ]: Factory-set