Filter
Top Products
System Configuration 4-83
No. Error message Action
21
Invalid host name
You can use only alphanumeric characters, minus
sign (–), and underscore (_) for a host name. A host
name should be 64 characters or less.
22
Invalid domain name
You can use only alphanumeric characters, minus
sign (–), and underscore (_) for a domain name. A
domain name should be up to 128 characters.
23
The SMTP server address is too
long.
Specify the value within 128 characters.
24
Invalid SMTP port number. You can only use numeric values.
25
Invalid retry count You can only use numeric values.
26
Invalid retry interval You can only use numeric values.
27
"To" is too long. Specify the value within 128 characters.
28
"From" is too long. Specify the value within 128 characters.
29
"Subject" is too long. Specify the value within 256 characters.
30
The message is too long. The message should be up to 1024 characters.
31
Failed to open the file: The specified file may not exist. Check the file name.
32
Failed to close the file: The specified file may be corrupted.
33
Can’t open the file: The specified file may not exist. Check the file name.
34
Timeout has occurred.
Try again. If the error persists, contact your service
representative because a failure may have occurred in
BMC.
Firmware update errors
No. Error message Action
1 There are uncompleted update
images on BMC as follows:
Reboot the server to complete the update.
2
Failed to acquire status of the
update area.
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
3
Update data is too large:
Some update files may be corrupted. Obtain update
files again.
4
Failed to prepare update
The network may be busy. Try again. If the error
persists, contact your service representative because
a failure may have occurred in BMC.
5
Invalid file size:
The update file may be corrupted. Obtain the update
file again.
6 Could not find the revision
information:
Some update files may be corrupted. Obtain update
files again.