Filter
Top Products
Troubleshooting 7-31
Event Log
HAS Daemon-related logs are recorded in the system event log.
o When you manage servers using NEC ESMPRO Manager, the following message
may be recorded in the system event log. This message does not indicate an event
that impacts operations. However, if it is recorded frequently, there may be
problem in OS or the software environment. Contact your sales agent.
Source: HAS Daemon
Type: Warning
Event ID: 800000cc – 800000d2
o The following message may be recorded in the system event log for operation or
replacement maintenance of each network adapter, SCSI disk or fibre channel.
This message does not indicate an event that impacts operations. However, if it is
recorded frequently or even when maintenance procedures are followed, there
may be problem in OS or the software environment. Contact your sales agent.
Source: HAS Daemon
Type: Warning
Event ID: 800000cc – 800000d2
hasftctl-related logs are recorded in the system event log.
o The following message may be recorded in the system event log. This log does not
indicate an event that impacts operations. This message informs that the CPU
modules are no longer in the duplex mode. However, dual configuration is to be
set to the CPU modules again, so this warning does not indicate any impact on the
system operation.
Source: hasftctl
Type: Warning
Event ID: 800704B2
Description: The driver failed the fast re-sync function of the CPU module.
Source: hasftctl
Type: Warning
Event ID: 80070DAC
Description: The error occurred on the CPU module.
Source: hasftctl
Type: Warning
Event ID: 80070fa0
Description: The error occurred on the CPU module.
Source: hasftctl
Type: Warning
Event ID: 40071209
Description: CPU is not doubled.