NEC LT170 Projector User Manual


 
E-25
3. Rotate the SELECT +/- dial to select [Setup1] - [Security] and press
the ENTER button.
The Security menu will be displayed.
4. Rotate the SELECT +/- dial to select [Keyword] and press the ENTER
button.
The software keyboard will be displayed.
5. Use the SELECT +/- dial to type a keyword in the Input field.
Selected characters will be displayed in Input field.
* The keyword must be no more than 10 alphanumeric characters.
Typing a keyword
*To select a character, rotate the SELECT+/- dial to highlight the
character you want to select and press the ENTER button.
*To delete a character, rotate the SELECT+/- dial to highlight
and press the ENTER button. The character at the far right will be
deleted.
*For the selected keyword to take effect, rotate the SELECT+/- dial
to highlight
and press the ENTER button.
*To cancel the selected keyword, rotate the SELECT+/- dial to high-
light
and press the ENTER button.
6. After finishing typing keyword, rotate the SELECT+/- dial to highlight
[Exit] and press the ENTER button.
The confirmation screen will be displayed.
7. Rotate the SELECT +/- dial to select [Yes] and press the ENTER but-
ton.
The Security function is enabled.
To turn on the projector when Security is enabled:
1. Press and hold the POWER (ON/STAND BY) button for a minimum of
2 seconds.
The projector will turn on and display a message to the effect that the
projector is security-protected.
2. Press the MENU button.
The Keyword input screen will be displayed.
3. Enter your keyword.
For entering your keyword, see Step 5 in “To set a keyword”.
4. Select
and press the ENTER button.
The Security is unlocked. You can view a projected image.
The unlock condition is maintained until the main power is turned off by
unplugging the power cable.
CONVENIENT FEATURES