NEC NP115 Projector User Manual


 
48
5. Using On-Screen Menu
AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]
Adjuststheimagelocationhorizontallyandvertically.
- Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.
- Yourmanualadjustmentsfor[CLOCK],[PHASE],[HORIZONTAL],and[VERTICAL]willbestoredinmemoryfor
thecurrentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandverticalfrequency,
its adjustments will be called up and applied.
Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET][CURRENTSIGNAL]or[ALL
DATA]andresettheadjustments.
SelectingAspectRatio[ASPECTRATIO]
The term “aspect ratio” refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
•Thistableshowstypicalresolutionsandaspectratiosthatmostcomputerssupport.
Resolution Aspect Ratio
VGA 640x480 4:3
SVGA 800x600 4:3
XGA 1024x768 4:3
WXGA 1280x768 15:9
WXGA 1280 x 800 16:10
WXGA+ 1440 x 900 16:10
SXGA 1280 x 1024 5:4
SXGA+ 1400 x 1050 4:3
UXGA 1600x1200 4:3
Options Function
AUTO The projector will automatically determine the incoming signal and display it in its aspect
ratio. ( next page)
The projector may erroneously determine the aspect ratio depending on its signal. If this
occurs, select the appropriate aspect ratio from the following.
4:3 The image is displayed in 4:3 aspect ratio.
16:9 Theimageisdisplayedin16:9aspectratio.
15:9 The image is displayed in 15:9 aspect ratio.
16:10 Theimageisdisplayedin16:10aspectratio.
WIDE ZOOM The image is stretched left and right.
Parts of the displayed image are cropped at the left and right edges and therefore not
visible.