NEC NP115 Projector User Manual


  Open as PDF
of 92
 
60
5. Using On-Screen Menu
TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP.)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
IN input will power on the projector and simultaneously project the computer’s image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
NOTE:
• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-
binationoftheAUTOPOWEROFFfunction.
• Thisfunctionwillnotbeavailableunderthefollowingconditions:
- whenacomponentsignalisappliedtotheCOMPUTERINconnector
- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied
• ToenabletheAUTOPOWERON(COMP.)afterturningofftheprojector,wait3secondsandinputacomputersignal.
Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP.)willnotworkandtheprojector
remains in standby mode.
EnablingPowerManagement[AUTOPOWEROFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,
20min., 30min.) if there is no signal received by any input or if no operation is performed.
SelectingDefaultSource[DEFAULTSOURCESELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ...................................Sets the projector to default to the previous or last active input each time the projector is turned
on.
AUTO ..................................Searches for an active source in order of COMPUTER → VIDEO → S-VIDEO → COMPUTER and
displays the first found source.
COMPUTER ........................Displays the computer signal from the COMPUTER IN connector every time the projector is turned
on.
VIDEO .................................Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO .............................Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
SelectingPortforExternalEquipment[CONTROLTERMINAL](NP215only)
This option allows you to select a port for controlling the projector either from PC Control or over a LAN.
PC CONTROL ......... Select for controlling the projector from external equipment connected to the PC CONTROL port (D-Sub 9
Pin).
LAN ........................ Select for controlling the projector from external equipment connected to the LAN port (RJ-45).
NOTE:
- When[POWER-SAVING]isselectedfor[STANDBYMODE],controllingtheprojectorfromexternalequipmentisnotpossible.
- ThePCControlportandLANportarenotactiveatthesametime.
 previous next