Filter
Top Products
19
4-2. Wireless LAN
When connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of
“NETWORK SETTINGS” selected from On-Screen Menu.
Note
The wireless LAN cannot be used with VT800.
■ Flow of Setting
Setting of "CONNECTION".
Select SSID in "SITE SURVEY".
Input "SSID" (if necessary).
Select "NETWORK TYPE" (if necessary).
Select "CHANNEL" (if necessary).
Setting of "SECURITY"
Select "SECURITY TYPE".
Select "KEY SELECT".
Set "KEY 1 to KEY 4".
If "EASY CONNECTION" is selected
8
8
9
10
11
12
13
14
15
16
16
1
3
Step
Display "WIRELESS" page of "NETWORK SETTINGS".
4
Step Input "IP ADDRESS".
2
Step Select "PROFILES".
5
Step Input "SUBNET MASK".
6
Step Input "GATEWAY".
7
Step Input "DNS CONFIGURATION".
17
Step Finalize "ADVANCED".
18
Step Reconnect the network.
19
Step Finalize the setting.
Step - Setting of "ADVANCED".
Step Enable or disable "DHCP".
If "Disabled" (without check mark)
If "Enabled" (with check mark)
4. Setting the LAN Setting of Projector
Setting the LAN Setting of Projector
4