Filter
Top Products
23
9
Select SSID from “SITE SURVEY” (if necessary).
A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are
to be connected are selected from this list. When SSID is selected from the list, the “SSID” field,
“TYPE” field and “CHANNEL” field will also be automatically set.
<1> Press the
SELECT ̄
button once to highlight “SITE SURVEY” and press the button.
Searching SSID will begin.
When searching SSID is complete, a list of SSID is displayed.
Icon
............ Wireless access point ............Personal computer (AD HOC)
........... WEP, WPA-PSK, WPA-EAP, WPA2-PSK, or WPA2-EAP setting
<2> Use the
SELECT ̄/̆
button to highlight the SSID of the network to be connected.
Press the button once to highlight [OK] and press the button.
If the SSID to be connected is not on the list, press the
EXIT
button.
Note
To connect SSID for which WEP or WPA-PSK, etc. is set, the same setting must be made on
the projector ( page 25).
10
Input or edit “SSID” (if necessary).
SSID selected in “SITE SURVEY” are automatically input.
If the highlight is moved to the “SSID” field and the button is pressed, a software keyboard is
displayed and characters can be input or edited.
The default setting of the projectors is “NECPJ”.
4. Setting the LAN Setting of Projector
Setting the LAN Setting of Projector
4