HS960 Wireless Gateway User Guide YML857 Rev1
14 www.netcomm.com.au
2. INSTALLATION
2-1 Wall-Mounting
The HS960 can be wall-mounted by applying the two mounting brackets supplied.
Figure 2-1 Wall-Mounting Bracket - Bottom of HS960
1. Install two screws on a wall according to the relative positions shown below.
Figure 2-2
2. Hang HS960 on the wall by sliding the two screws in the mounting brackets.
Note: If the screws are not properly anchored, the strain of the cables connected to the HS960 rear panel connectors could pull out the
HS960 from the wall.