Filter
Top Products
YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 17
2-4 Getting Started
1. Place the HS960 and AG-200E Printer on a flat work surface.
2. Connect the Ethernet cable to the HS960’s LAN port.
3. Connect the other end of the Ethernet cable to the AG-200E Account Generator Printer’s RJ45 port.
4. Ensure that your modem and computer are both switched on.
5. Use the supplied cable to connect the HS960’s WAN port to the modem. Check that the Cable/xDSL
Status LED lights.
6. Connect your computer to one of the 10/100 LAN ports on the HS960 . Check that the LAN Port Status
LED lights.
7. Configure the further parameters via a Web browser.
Figure 2-4 HS960 Connection