NetComm HS960 Network Router User Manual


 
YML857 Rev1 HS960 Wireless Gateway User Guide
www.netcomm.com.au 49
Item Default Description
RADIUS Authentication
Disable Option: No Authentication or RADIUS Server.
Disable (No Authentication)
A subscriber can directly access the Internet without entering a username and
password.
Enable (RADIUS Authentication)
The HS960 provides “RADIUS Authentication” to build up an Internet service with a
RADIUS server. If RADIUS Authentication is enabled, all subscribers’ authentication
will send to the RADIUS Server by RADIUS protocol (RFC 2865, 2866).
Time to Finish/
Accumulation
Enable Provides two different accounting calculatations for the Internet service.
Primary RADIUS Server
Server IP
Empty Enter the IP address of RADIUS server.
Authentication Port
1812
Enter the authentication port number. The authentication port number must match
with the RADIUS server setting. The allowed numbers are from 0 to 65535.
Accounting Port
1813 Enter the accounting port number. The accounting port number must match
with the RADIUS server setting. The allowed numbers are from 0 to 65535.
Share Secret Key
Empty The key number also has to match with the Server setting. Up to 64 characters
are allowed.
Secondary RADIUS Server
Server IP
Empty Enter the IP address of RADIUS server.
Authentication Port
1812 Enter the authentication port number. The authentication port number must
match with the secondary RADIUS server setting. The allowed numbers are
from 0 to 65535.
Accounting Port
1813
Enter the accounting port number. The accounting port number must match with
the secondary RADIUS server setting. The allowed numbers are from 0 to 65535.
Share Secret Key
Empty The share secret key, the key number also has to match with the secondary
RADIUS Server setting. Up to 64 characters are allowed.
Retry times when
Primary fail
1 Specify the retry times when primary fail.
Retry Frequency ~
Seconds
3 The field default value is 3 seconds.
Accounting Service
Enable Enables or disables the accounting service.
Interim Update Time
5 Minutes Specify the interim update time.
Authentication Method
CHAP Enter the authentication method of RADIUS server.
WISPr Smart Client
Enable
Disable Enables or disables WISPr Smart Client roaming function.
Login Mode
Directly Reply Options: Directly Reply, Proxy Reply with “Redirect Login Page” URL and
Proxy Reply with Specific URL. The login mode information for the IPASS GIS
connection. (Provided by your ISP).