Filter
Top Products
YML894 Rev1 N3G002W 3G Wireless Router User GuideN3G002W 3G Wireless Router User Guide
www.netcomm.com.au 25
Dynamic IP Address with Road Runner Session Management
This connection will get the IP address from the internet service provider. Choose this connection if you are
connecting the router to a Telstra Bigpond Cable modem.
• Account. Type in your Account username.
• Password. Type in your account password.
• Login Server (Optional). Type in the login server of the Roadrunner service.
• Auto Backup. Tick Enable to make the 3G connection as a backup connection.
PPP over Ethernet
Most ADSL service will use PPP over Ethernet protocol. Use this if you connect the router to a bridge ADSL modem.
• PPPoE Account/ PPPoE Password. Type in your account username and password.
• MTU. Leave as default unless instructed by your Internet Service Provider.
• Primary DNS/Secondary DNS. Primary DNS/Secondary DNS. Type in the DNS address assigned by your
Internet Service Provider. Optional.
• Maximum Idle Time. Enter the number of second you want to have elapsed without any activity before
your Internet connection terminates automatically. Set to 0 to disable.
• Auto-reconnect- Tick to enable auto reconnect function.
• PPPoE Service Name (Optional). Type in the PPPoE service name assigned by your Internet Service Provider.
• Assigned IP Address (Optional). Type in the IP address assigned by your Internet Service Provider.
• Auto Backup. Tick Enable to make the 3G connection a backup connection.