NetComm N3G002W Network Router User Manual


 
YML894 Rev1 N3G002W 3G Wireless Router User GuideN3G002W 3G Wireless Router User Guide
www.netcomm.com.au 47
Advanced Setting > System Log
The N3G002W Wireless router supports two types of System log. One is via syslog (using UDP packet) and
the second is via email.
For syslog, you need to enter the IP address of the host computer that will receive the syslog message and
tick on the Enable tick box for IP Address for Syslog.
For email logging you need to define the following:
Email Alert. Tick on the Enable tick box to enable this feature.
SMTP Server IP and Port. Enter the IP address and port of the SMTP server separated by “:” (without
quotes). If you do not specify the port number, the default value (25) will be used. For example, “mail.
yoururl.com” or “mail.yoururl.com:26”.
Send E-mail alert to. Enter the recipients for the email logs. To assign more than one recipient, use “;” or
“,” (without quotes) to separate the email addresses. For example, recipient1@yoururl.com; recipient2@
yoururl2.com.
Email Subject (Optional). Enter the subject for the email.
Click Save to save the settings and Undo to cancel.