Filter
Top Products
unicast.
Format port-all storm-control broadcast-unknown <value>
Mode Global Config
8.5) port-all storm-control all-cast
This command configures storm control for broadcast, multicast and
unknown unicast.
Format port-all Storm-Control all-cast <value>
Mode Global Config
qos
1) qos qos-advanced
Configure qos advanced mode.
1.1) qos qos-advanced DSCP
This command enables DSCP mode.
Format qos qos-advanced DSCP
Mode Global Config
1.2) qos qos-advanced ip_precedence
This command enables IP Precedence mode.
Format qos qos-advanced ip_precedence
Mode Global Config
1.3) qos qos-advanced none
This command disables qos advanced mode.
Format qos qos-advanced none
Mode Global Config
2) qos cos
This command configures 802.1p priority queue mapping.
Format Qos cos priority <0-7> queue <1-4>
Mode Global Config
3) qos dscp
This command specifies dscp value to queue mapping.
Format qos dscp <0-63> queue <1-4>
Mode Global Config
4) qos port-based
This command configures port-based priority mapping.
Format qos port-based port <WORD>status {enable | disable}
Mode Global Config
5) qos scheduling
Configure qos scheduling mode.
5.1) qos scheduling strict
This command sets to strict priority.
Format qos scheduling strict
Mode Global Config
5.2) qos scheduling wrr
This command sets to Weight Round-Robin.
Format qos scheduling wrr
Mode Global Config
6) qos ip-precedence
This command configures IP precedence queue mapping.
Format qos ip-precedence <0-7> queue <1-4>
Mode Global Config
7) qos wrr
NP2724M User Manual 28