Filter
Top Products
3.1) rmon del event
This command deletes rmon event entry.
Format rmon del event index< 1..65535 >
Mode Global Config
3.2) rmon del alarm
This command deletes rmon alarm entry.
Format rmon del alarm index< 1..65535 >
Mode Global Config
access list
Note: This commands only support on L2+ NP series management switches.
1) access-list name <WORD> add
This command creates a new access-list.
Format access-list name <WORD> add priority <1-65535>
Mode Global Config
2) access-list name <WORD> action
2.1) access-list name <WORD> action deny
This command denies an ACL entry.
Format access-list name <WORD> action deny
Mode Global Config
2.2) access-list name <WORD> action permit
This command permits an ACL entry and queue 1-4 will assign priority
queue when rule activated.
Format access-list name <WORD> action permit {<cr>|queue <1-4>}
Mode Global Config
3) access-list name <WORD> clear
This command clears ACL entry contents.
3.1) access-list name <WORD> clears SRC IP
This command clears the source IP/subnet mask filter.
Format access-list name <WORD> clear SRC IP
Mode Global Config
3.2) access-list name <WORD> clears DST IP
This command clears the destination IP/subnet mask filter.
Format access-list name <WORD> clear DST IP
Mode Global Config
3.3) access-list name <WORD> clear L4port
3.3.1) access-list name <WORD> clear L4port SRC port
This command clears TCP/UDP source port filter.
Format access-list name <WORD> clear l4port SRC port
Mode Global Config
3.3.2) access-list name <WORD> clear l4port DST port
This command clears TCP/UDP destination port filter.
Format access-list name <WORD> clear l4port DST port
Mode Global Config
3.4) access-list name <WORD> clear packet-type
This command clears packet type filter.
Format access-list name <WORD> clear packet-type
Mode Global Config
3.5) access-list name <WORD> clear mac SA
NP2724M User Manual 35