Filter
Top Products
Mode Global Config
3) set igmp-proxy
This command configures igmp proxy.
Format set igmp-proxy {enable | disable}
Mode Global Config
4) set static-mcast
Configure static multicast.
4.1) set static-mcast name <WORD> add
This command create a multicast group.
Format set static-mcast name <WORD> add vid <vlan-ID> mac <mac-
addr>member port <port list>
Mode Global Config
4.2) set static-mcast name <WORD>delete
This command delete a static multicast group.
Format set static-mcast name <WORD>delete
Mode Global Config
snmp
1) snmp notify
This command configures snmp notification.
Format snmp notify {enable|disable}
Mode Global Config
2) snmp group
2.1) snmp group add
This command create a snmp group.
Format snmp group add <WORD>version <1-2>
Mode Global Config
2.2) snmp group delete
This command delete a snmp group.
Format snmp group delete <WORD>
Mode Global Config
3) snmp user
3.1) snmp user add
This command creates a snmp user.
Format snmp user add <user name> group <group name> version <1-
3>
Mode Global Config
3.2) snmp user delete
This command deletes a snmp user.
Format snmp user delete <WORD>
Mode Global Config
4) snmp community
4.1) snmp community add
This command creates a community.
Format snmp community add <community name> group <group
name> mgmt-ip <ip-addr>
Mode Global Config
4.2) snmp community delete
This command deletes a community.
Format snmp community delete <community name>.
Mode Global Config
NP2724M User Manual 30