NetComm NP2724M Switch User Manual


 
3.2. Technical Specifications
3.2.1. Software Specification
NP2724M 24 Port 10/100 + 2 Gigabit VLAN Managed Switch
Four groups (history, statistics, alarms, and events) of embedded remote
monitoring (RMON) agents for network monitoring and traffic analysis
Provides SNMP protocol(v1/v2c/v3) to monitor and control the switch by
using SNMP management applications such as HP Open View
IGMP snooping support to limit the flooding of IP multicast traffic and
filtering for controlling the set of multicast groups to which the hosts that
connected to the switch
Supports 802.1d/1w/1s Spanning Tree Protocol for loop free installation.
Supports 802.1Q VLAN for assigning users to VLAN associated with
appropriate network resources, traffic patterns, and bandwidth. Up to 256
VLAN entries can be configured
Supports Management VLAN for administration to protect switch to be
attacked by client.
Built-in DHCP client to get IP address from DHCP server automatically
Supports SNTP to synchronize the precision time with Internet Time server.
Supports one-to-one or many-to-one Port Mirroring.
Supports IEEE 802.3ad Link Aggregation, up to 3 aggregation groups.
Supports for IEEE 802.1p/DSCP CoS scheduling for classification and
preferred high-priority voice traffic on a port-port basis
Per port Ingress and Egress Rate Limiting. Minimum rate is 64 Kbps,
granularity is 64 Kbps
Supports Static Mode and Dynamic Learning Mode for Port Security
function. Support up to 24 MAC addresses for each port.
Supports Protected port feature.
Supports 802.1X port-based authentication, and build-in RADIUS client to
NP2724M User Manual 46