Filter
Top Products
34 Technical Specifications and Default Configuration
Default Configuration
You can use the reset button located on the rear panel of your Wireless ADSL2+ Modem Router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the reset button for three seconds. Your Wireless ADSL2+ Modem Router will return to
the factory configuration settings shown in the table below.
Table 2. Factory Default Configuration Settings
Feature Default Behavior
Router Login
User login URL http://www.routerlogin.net or http://www.routerlongin.com
User name (case sensitive) admin
Login password (case sensitive) password
Internet Connection
WAN MAC address Use default address
WAN MTU size 1500
Port Speed AutoSense
Local Network (LAN)
Lan IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled
Time zone GMT
Time zone adjusted for daylight saving
time
Disabled
Firewall
Inbound (communications coming in from
the Internet)
Disabled (except traffic on port 80, the http port)
Outbound (communications going out to
the Internet)
Enabled (all)
Source MAC filtering Disabled