Filter
Top Products
Reference Manual for the Model DM602 ADSL Modem
4-6 Basic Configuration of the Modem
7. After selecting Modem Device type, the modem sends the modem’s built in Web
Configuration Manager screen below (see
Figure 4-6) to your browser.
Figure 4-6. Modem Device Mode Basic Settings window
8. ISP Parameters for Internet Access. Your ISP will indicate whether your Multiplexing Method
is VC-BASED or LLC-BASED and which VPI and VCI is used. Enter the information in this
screen. The most common Multiplexing Method is LLC-based. If your service provider does
not indicate which one is used, use LLC-BASED.
9. Click on Apply.
Completing the Configuration
Your modem is now configured to provide Internet access for your computer. The following
chapters describe how to configure the Advanced features of your modem, and how to
troubleshoot problems that may occur.
Note: When the Model DM602 modem is set to operate in Modem Device Mode, your
computer must be set with a static IP address in the range of 192.168.0.2-192.168.0.254
with a subnet mask of 255.255.255.0, and a gateway address of 192.168.0.1 in order to
be able to access the built-in Web-based Configuration Manager.
DM602.book Page 6 Monday, August 12, 2002 6:09 PM