NETGEAR FSM726 Switch User Manual


 
Page 11 of 11
LED Descriptions
The front panel of the NETGEAR Model FSM726 Managed Switch has LEDs that provide a quick and
accurate display of port speed and activity. The Gigabit Ethernet ports also have LEDs that show link and
mode status. Table 2-1 summarizes the LEDs on the switch and Gigabit Ethernet module.
Table 2-1. Front Panel LEDs:
Feature Description
Power LED
Solid Green –Power is supplied to the switch & operating normally
Off – Power is Disconnected.
24-10/100M Ports
Two LED /Port
Link/ACT LED:
Solid Green – A valid 10/100Mbps link is established on the port.
Blinking Green – Packets transmission or reception is occurring
on the port at 100Mbps.
OFF –No 10/100Mbps link is established on the port.
100M LED
Solid Green – A valid 100Mbps link is established on the port.
OFF –No 100Mbps link is established on the port .
2-10/100/1000M Ports
Two LED / Port
Link/ACT LED :
Solid Green – A valid 10/100/1000Mbps link is established on the
port.
Blinking Green – Packets transmission or reception is occurring
on the port at 10/100/1000Mbps.
OFF –No 10/100/1000Mbps link is established on the port.
100/1000M LED :
Solid Green –A valid 1000Mbps link is established on the port.
Solid Yellow – A valid 100Mbps link is established on the port.
OFF –No 100/1000Mbps link is established on the port.
Note: GBIC port using TP port LED display.
Console Port
Your NETGEAR Model FSM726 Managed Switch has a console port on the front panel. This port is labeled
Console and is required for initial management configuration of the switch. It also lets you manage the
switch using a directly connected VT-100 terminal, personal computer (PC), Apple Macintosh, or UNIX
workstation. The terminal, computer, or workstation connects to the console port using the null-modem
cable supplied with your switch.
The console port is configured to use the following settings:
Baud rate: 9,600 bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none
These settings appear below the connector on the switch front panel.