Page 19 of 19
APPENDIX A: TECHNICAL SPECIFICATIONS
This appendix provides technical specifications for the NETGEAR Model FSM726 Managed Switch.
Network Protocol and Standards Compatibility
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z 1000BASE-SX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x flow control
Management
IEEE 802.1Q Static VLAN (Up to 64)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1D Spanning Tree Protocol
Port Trunking - Manual as per IEEE802.3ad Link Aggregation
IGMP v1, v2 Snooping Support
Port Mirroring support
SNMP v1
RFC1757 RMON 1 groups 1,2,3, and 9
RFC1213 MIB II
RFC1643 Ethernet Interface MIB
RFC1493 Bridge MIB
RFC2131 DHCP client (& BootP)
RFC2138 RADIUS client
Broadcast storm control
Private Enterprise MIB
Configuration file upload, download (TFTP)
Interface
26 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports)
2 Gigabit Interface Converter (GBIC) slots for GBIC modules
RS-232 Console Port
LEDs
Per port (10/100 and Gigabit): Link/ Activity, Speed
Per device: Power
Performance Specifications
Forwarding modes: Store-and-forward
Bandwidth: 8.8 Gbps (Non-blocking)
Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for10 Mbps to
100 Mbps transmission
Address database size: 8,000 media access control (MAC) addresses per system
Addressing: 48-bit MAC address
Packet buffer memory: 2Mb embedded memory for 26 ports
Mean Time Between Failure (MTBF): 420,000 hours (~ 47.9 years)