NETGEAR FSM726 Switch User Manual


 
Page 6 of 6
Features
The following list identifies the key features of the NETGEAR Model FSM726 Managed Switch.
Twenty-four 10/100 Mbps auto sensing Fast Ethernet switching ports
Two Gigabit Ethernet ports that can be used either through the built-in RJ-45 ports for 10/100/1000
Mbps connectivity or through the GBIC modules for a variety of fiber connections
Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3z/ab (1000BASE-X, 1000BASE-T)
o IEEE 802.3x (full-duplex flow control)
Full Layer 2 switch management including:
o SNMP
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 64 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o Port Trunking - Manual as per IEEE802.3ad Link Aggregation
o Port Mirroring
o DHCP Client for easy set up
o Configuration file export/import
o TFTP firmware upgrade
Security to better safeguard your network
o Password Access Control
o IP Access Control List
o RADIUS Client Support
Traffic management to better manage traffic flows through your switch
o IEEE 802.1p (Class of Service)
o DiffServ traffic prioritization
o Broadcast Storm Control
o IGMP snooping
o Half-duplex back-pressure control
o Full-duplex IEEE 802.3x pause frame flow control
Multiple interfaces to access the management features
o Browser-based Graphical User Interface (GUI)
o Command Menu Interface (CMI)
o Command Line Interface (CLI)
o Telnet or Console
o SNMP-based Network Management Software (NMS)
Automatic hardware configuration on all RJ-45 ports
o Auto-sensing and auto-negotiating speed
o Auto Uplink™ on all ports to make the right connection (MDI/MDI-X)
o Full- and half-duplex functions