NETGEAR FSM726 Switch User Manual


 
Page 23 of 23
APPENDIX C: Default Settings
This appendix provides the default settings for the NETGEAR Model FSM726 Managed Switch.
Feature FSM726 Default Setting
Port Speed Auto-negotiation
Port Duplex Auto-negotiation
Flow Control (half duplex) Enabled
Flow Control (full duplex) Enabled
Broadcast Storm Control Enabled (3000 packets per second)
Gigabit ports RJ-45 enabled
IP Configuration DHCP enabled
Password protection Disabled
User Name Admin
Password 1234
VLAN All ports belong to Default VLAN (VLAN 1) as untagged ports
IP Multicast Filtering Disabled
Spanning Tree Protocol Enabled
Fast Link Disabled
Traffic Prioritization
802.1p
DiffServe
Optimized for flow control, all ports normal priority
0-31 normal priority, 32 – 63 high priority
MAC address aging 300 seconds
SNMP Community Public (you must add application to Host table before switch
will respond to SNMP requests)