Filter
Top Products
Page 12 of 12
In addition to using the console port, you can manage the switch using a Web browser or a Simple Network
Management Protocol (SNMP) management program.
Note: You must use the console port for the initial management configuration.
For more information about console-port connections, see “Connecting to the Console Port” in Chapter 3
Installation. For more information about managing the switch, see the User Manual located on the CD-
ROM.
Reset Button
This recessed button on the front panel once pushed will perform a hardware reset of the switch. This is
equivalent to power-cycle the switch. The reset will not change any of the switch's configuration, nor will it
save any changes to the configuration. Please do not push this button if you're in the middle of
downloading a new firmware.