![](http://pdfasset.owneriq.net/7/4b/74be9739-985e-4e90-b42b-0f4ef47e67e2/74be9739-985e-4e90-b42b-0f4ef47e67e2-bgd8.png)
Reference Manual for the ProSafe VPN Firewall FVS318v3
E-22 VPN Configuration of NETGEAR FVS318v3
January 2005
• Remote LAN IP Subnet
– IP Address: 10.5.6.1 (in this example), must be unique at each VPN tunnel endpoint
– Subnet Mask: 255.255.255.0 (in this example)
All traffic from the range of LAN IP addresses specified on FVS318v3 A and FVL328 B will now
flow over a secure VPN tunnel once the VPN tunnel is initiated (see “Initiating and Checking the
VPN Connections” on page 25).
Figure E-15: VPN parameter entry at Gateway A (FVS318v3) and Gateway B (FVL328)
Gateway A VPN Parameter Entry Gateway B VPN Parameter Entry
Continue as shown in Figure E-3 Continue as shown in Figure E-3