Filter
Top Products
Reference Manual for the ProSafe VPN Firewall FVS318v3
3-14 Connecting the Firewall to the Internet
January 2005
4.
If your Internet connection does require a login, fill in the settings according to the instructions
below. Select Yes if you normally must launch a login program such as Enternet or WinPOET
in order to access the Internet.
Note: After you finish setting up your firewall, you will no longer need to launch the ISP’s
login program on your PC in order to access the Internet. When you start an Internet
application, your firewall will automatically log you in.
a. For connections that require a login using protocols such as PPPoE, PPTP, Telstra Bigpond
Cable broadband connections, select your Internet service provider from the drop-down
list.
Figure 3-11: Basic Settings ISP list
b.
The screen will change according to the ISP settings requirements of the ISP you select.
c. Fill in the parameters for your ISP according to the Wizard-detected procedures starting on
page 3-11.
d. Click Apply to save your settings.