Reference Manual for the ProSafe VPN Firewall FVS318v3
Basic Virtual Private Networking 5-25
January 2005
6.
Repeat for the FVS318v3 on LAN B. Pay special attention and use the following network
settings as appropriate.
• WAN IP of the remote VPN gateway (e.g., 14.15.16.17)
• LAN IP settings of the remote VPN gateway:
— IP Address (e.g, 192.168.0.1)
— Subnet Mask (e.g., 255.255.255.0)
— Preshared Key (e.g., 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
a. Open the FVS318v3 management interface and click on VPN Status under VPN to get the
VPN Status/Log screen (Figure 5-30).
Figure 5-30: VPN Status/Log screen
b.
Click on VPN Status (Figure 5-32) to get the Current VPN Tunnels (SAs) screen
(Figure 5-31). Click on Connect for the VPN tunnel you want to activate.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 5-26 for information on the other ways.