Filter
Top Products
Get Started
17
M6100 Series Switches
4. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
5. Click the Login button.
The web management interface menu displays.
6. Select System > Configuration > User
Accounts
.
7. From the User menu, select Create.
A new user is created.
8. In the User Name field, enter a new user name.
9. In the Password field, enter a new password and then retype it in the Confirm Password
field.
Note: If SNMPv3 authentication is used for this user, the password must be
eight or more alphanumeric characters.
10. If you do not need authentication and encryption, go to Step 14.
11. To enable authentication, from the Authentication Protocol menu, select either MD5
or
SHA.
12. If you do not need encryption, go to Step 14.
13. T
o enable encryption, from the Encryption Protocol menu, select
DES. In the Encryption
Key field, enter an encryption code of eight or more alphanumeric characters.
14. Click the Apply button.
Your settings are saved.