NETGEAR MR814v2 Network Router User Manual


 
Reference Manual for the MR814v2 Cable/DSL Wireless Router
Introduction 1-7
The Router’s Rear Panel
The rear panel of the Model RP614 router contains the port connections listed below.
Figure 1-2: MR814v2 Rear Panel
Viewed from left to right, the rear panel contains the following features:
AC power adapter outlet
Four Local (LAN) Ethernet ports for connecting the router to the local PCs
Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem
Factory Default Reset push button
Wireless antenna
Wireless
On Indicates that the Wireless port is initialized.
Local
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
The Local (LAN) port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
Table 1-1. LED Descriptions