NETGEAR WGR826V Network Router User Manual


 
Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
3-4 Connecting the Router to the Internet
202-10051-01, March 2005
Figure 3-4: Verify the connections according to the status lights on the wireless router
d.
Check the wireless router status lights to verify the following:
Power: The power light should turn solid green. If it does not, see “Troubleshooting
Tips” on page 3-10.
Call Agent: The LED will be blinking when the unit is registering with the call agent
and will be solid if the unit is registered with the call agent. The LED will of off if the
unit is not registered.
Internet: The Internet port light should be lit. If not, make sure the Ethernet cable is
securely attached to the wireless router Internet port and the modem, and the modem
is powered on.
Wireless: The wireless lights should be lit. If not, see “Troubleshooting Tips” on page
3-10.
Phone: The Phone light will not be lit until your phone service provider provisions the
phone service. Check the user guide from your phone service provider for details on
provisioning the phone service.
LAN: A LAN light should be lit. Green indicates your computer is communicating at
100 Mbps; yellow indicates 10 Mbps. If a LAN light is not lit, check that the Ethernet
cable from the computer to the router is securely attached at both ends, and that the
computer is turned on.
Power Internet Port Wireless LAN Port 3Call Agent Phone 1