NETGEAR WGR826V Network Router User Manual


 
Reference Manual for the 54 Mbps Wireless Router with Phone Adapter WGR826V
Doing Basic Router Housekeeping 6-3
202-10051-01, March 2005
Firmware Version: This is the current software the Router is using. This will change if you
upgrade your Router.
WAN Port: These are the current settings that you set in the Basic Settings page.
MAC Address - the physical address of the WGR826V, as seen from the Internet.
IP Address - current Internet IP address. If assigned dynamically, and no Internet
connection exists, this will be blank or 0.0.0.0
Network Type - indicates either DHCP (IP address is obtained dynamically), PPPoE (IP
address requires a login), or Static (IP is statically entered).
IP Subnet Mask - the subnet mask associated with the Internet IP address.
Gateway IP Address - the Gateway associated with the Internet IP address.
Domain Name Server - displays the address of the current DNS.
LAN Port: These are the current settings, as set in the LAN IP Setup page.
MAC Address - the physical address of the WGR826V, as seen from the local LAN.
IP Address - LAN IP address of the Router.
DHCP - indicates if the WGR826V is acting as a DHCP Server for devices on your LAN.
IP Subnet Mask - subnet mask associated with the LAN IP address.
Wireless Port: These are the current settings, as set in the Wireless Settings page.
Name (SSID) - Service Set Identifier (SSID) of the WGR826V.
Region - the location (country).
Channel/Frequency - the current channel in use and Frequency of the Channel in
GigaHertz.
Mode - Mode of operation of the Wireless router.
Wireless AP - indicates if the Access Point feature of the WGR826V is enabled or not. If
not enabled, wireless users will not be connected to the Internet.
Broadcast Name - indicates if the WGR826V is broadcasting its SSID.
WEP/WPA Status - indicates whether security is enabled or disabled on the wireless port
and displays the security mode if enabled
BSSID - Basic service Set Identification. Usually MAC address of the wireless port of the
WGR826V
Click Connection Status to see information about your current connection.