Filter
Top Products
this situation, users are not required to provide their account credentials when accessing the shared
folder.
7. Click the Apply button.
8. Click OK button.
Your changes are saved and the pop-up screen closes.
Configure Host Settings
For SMB, NFS, FTP, Rsync, and HTTP, you can configure access rights for users on hosts. Host settings
do not apply to AFP. The access rights that you configure for one host apply to all users on the host. For
NFS, you can also configure the access rights that apply to any host, and, for individual hosts, you can
configure whether root access is granted.
To add a host and configure host access settings:
1. On the folder settings pop-up screen, click the Network Access tab.
2. Click one of the file-sharing protocol buttons:
• SMB
• NFS
• FTP
• Rsync
• HTTP
The screen adjusts to display the access properties for the selected protocol.
3. Click the Hosts tab on the left side of the pop-up screen.
If the host access list is empty, any host is allowed to access the shared folder. If
you add at least one host to the list, access to the shared folder is restricted to hosts
on the list only.
Note:
4. Click the + button ( ).
The Add Host pop-up screen displays.
Shared Folders
52
ReadyNAS OS 6.2