NETGEAR RP614 v4 Network Router User Manual


 
RP614v4 Cable/DSL Router Reference Manual
Advanced Configuration of the Router 4-5
v3.1, June 2008
1. From the Service & Game box, select the service or game that you will host on your network.
If the service does not appear in the list, refer to the following section, “Adding a Custom
Service”.
2. Enter the IP address of the local server in the corresponding Server IP Address box.
3. Click the Add button.
Adding a Custom Service
To define a service, game or application that does not appear in the Services & Games list, you
must determine what port numbers are used by the service. For this information, you may need to
contact the manufacturer of the program that you wish to use. When you have the port number
information, follow these steps:
1. If port forwarding services are already configured, make a note of the Start Port and the End
Port used by each service.
2. Click the Add Custom Service button.
3. In the Service Name box, type a name.
4. Enter an unused port number Starting Port box.
Note: To assure that the same computer always has the same IP address, use the reserved
IP address feature of your RP614v4 router. See “Using Address Reservation” on
page 4-11 for instructions on how to use reserved IP addresses.
Figure 4-4