NETGEAR V1.0 Network Router User Manual


 
Wireless Router Setup Manual
30 Default Configuration
v1.0, November 2007
Firewall
Inbound (communications coming in from
the Internet)
Disabled (bars all unsolicited requests)
Outbound (communications going out to
the Internet)
Enabled (all)
Wireless
Wireless Communication Enabled
SSID Name NETGEAR
Security Disabled
Broadcast SSID Enabled
Transmission Speed Auto
a
Country/Region United States in the US, otherwise varies by region
RF Channel 6 until region selected
Operating Mode Mode 1. 802.11n 2.4G mode
Mode 2. 802.11n 5G + Legacy 802.11g at 2.4G
Data Rate Best
Output Power Full
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.
Network Protocol and Standards Compatibility
Data and Routing Protocols: TCP/IP, RIP-1, RIP-2, DHCP
PPP over Ethernet (PPPoE)
Power Adapter
North America: 120V, 60 Hz, input
United Kingdom, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
Japan: 100V, 50/60 Hz, input
All regions (output): 12 V DC @ 1.5A output, 18W maximum
Table 2. Wireless Router Default Configuration Settings (continued)
Feature Default Setting