Filter
Top Products
Advanced Settings
112
CENTRIA WNDR4700/WNDR4720
Remote Management
The remote management feature lets you upgrade or check the status of your CENTRIA over
the Internet.
To set up remote management:
1. Select Advanced >
Advanced Setup > Remote Management.
Note: Be sure to change the router’s default login password to a secure
password. The ideal password contains no dictionary words from any language
and contains uppercase and lowercase letters, numbers, and symbols. It can
be up to 30 characters.
2. Select the T
urn Remote Management On check box.
3. Under
Allow Remote Access By, specify the external IP addresses to be allowed to access
the router’s remote management.
For enhanced security, restrict access to as few external IP addresses as practical.
• T
o allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
• T
o allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• T
o allow access from any IP address on the Internet, select Everyone.
4. Specify the port number for accessing the management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security
, enter a custom port number for the remote web management interface. Choose
a number from 1024 to 65535, but do not use the number of any common service port.
The default is 8080, which is a common alternate for HTTP.
5. Click Apply to have your changes take ef
fect.
6. When accessing your router from the Internet, type your router’
s WAN IP address into your
browser’s address or location field followed by a colon (:) and the custom port number. For
example, if your external address is 134.177.0.123 and you use port number 8080, enter
http://134.177.0.123:8080 in your browser.