Storage
58
CENTRIA WNDR4700/WNDR4720
Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device.
To go to storage advances settings:
On the USB Settings screen, click the Edit butto
n to display the following screen:
You can use this screen to specify access to the USB storage device.
• Network Device
Name. The default is readyshare. This is the name used to access the
USB device connected to the router.
• W
orkgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Acce
ss Method. The access methods are described here.
Network Connection. Enabled by defa
ult, this connection allows all users on the LAN to
have access to the USB drive.
HTTP.
Enabled by default. You can type http://readyshare.routerlogin.net/shares to
access the USB drive.
HTTP (via Internet). Disable
d by default. If you enable this setting, remote users can
type http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a
URL domain name to access the USB drive over the Internet. This setting supports file
uploading only.
FTP. Disa
bled by default.
FTP (via Internet). Disabled by defa
ult. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.
