Filter
Top Products
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
32
Figure 28- Last confirmation before firmware update
7. Using the terminal program, send the binary firmware file using “1K Xmodem” protocol.
Figure 29- File transfer in progress
8. After successful transmission the SERIMUX will automatically restart after few seconds. If not, either power down the
RACKMUX and power it back ON (or just press the “System Reset” button (page 30)) and press [Enter[.
If the firmware update failed or was interrupted for any reason, power cycle the SERIMUX (or see page 30) to reset the SERIMUX
to default settings) and repeat the procedure beginning at step 4.