Filter
Top Products
NTI AUDIO/HD VIDEO MATRIX SWITCH
17
Video Switch Page
The Video Switch page (right) displays the active
connections (shown in orange) and enables the user
to control the audio and video connections of the
VEEMUX-A, or just the video. (To change audio
connections separately, see page 18.) Up to 100
different connection configurations can be saved and
later recalled by any connection method.
Note: Configuration 0 will be automatically loaded
when the VEEMUX-A is powered up.
To change a connection, click on the radio button
(square image with circle in the center) that intersects
the input and output columns. A black dot will be
placed in the circle to indicate the selection. Then
press the Submit button. The display will be
reloaded with the selections changed to orange to
indicate they are now active. Multiple connections
can be changed simultaneously.
To quickly clear the selected radio buttons press
the Clear Changes button. This will only work if the
Submit button has not already been pressed with the
selections made.
To quickly connect all outputs to a single input,
choose the desired input from the "Set all Outputs to
Input" drop-down list and press the Submit button.
Figure 10- Web interface Video Switch page
Note: If radio buttons are selected in addition to using the "Set all Outputs to Input" option, the selections made by the
"Set all Outputs to Input" will take precedence when the Submit button is pressed. Selections that conflict with it will be
ignored.
To save a configuraton, from the Stored Configurations user interface, use the drop-down list to select the desired slot
(numbers 0-99) to save the active configuration into and press the Save button.
Note: This will save the currently active configuration on the
VEEMUX-A. If changes have been made in the web interface
without first pressing the Submit button, those changes will not
yet be part of the active configuration.
Note: If changes to the active configuration have been made by
another user prior to saving the
current connection selections, the changes made by the other
user will be saved as the configuration.
The webpage configuration that loads after a Save is the configuration that was actually saved.