Filter
Top Products
NTI AUDIO/HD VIDEO MATRIX SWITCH
18
To load a saved configuration, from the Stored Configurations user interface, use the drop-down list to select the
desired configuration. Then press the Load button. The VEEMUX-A will make the connections and the screen will
refresh to show the connections associated with that configuration selection.
To change video only, or audio and video, either
leave the "Video + Audio" block empty (to effect only
video) or use the mouse to place a check in the box
shown to the right (to effect audio and video
connections). With a change of status, press Save
to have it take effect.
To change audio connections only, the Audio Switch page (below) enables the user to control the audio
connections independently of the video connections.
Audio Switch Page
Using the same methods of control
described for the Video Switch page
(page 17) the user can separately
control the audio connections made
between ports on the VEEMUX-A.
Additionally, the user can mute any
output port or raise and lower the
volume at each output port.
Figure 11- Web interface Audio Switch page
Using the chart on page 19, apply the value for the desired level of volume for each output port.